
StarDust Mini Black
From the StarDust range, this mini-tower case takes Micro ATX and Mini-ITX motherboards. Four 120 mm RGB fans are pre-installed (3 at the front and 1 at the rear). It supports a graphics card up to 350 mm, a CPU air cooler up to 165 mm and an AIO radiator up to 280 mm. Steel and tempered glass chassis, with a glass side panel.
Colours
- Black
- White
The StarDust Mini lights up your first build
A glass-panel mini-tower PC case, four 120 mm RGB fans already fitted, a Micro ATX or Mini-ITX motherboard: you build, you plug in, and the system lights up behind the tempered glass.

First build: a Micro ATX case wide open
The glass door opens, the right panel and the front panel come off: you see what you are doing, you reach what you are after.
The StarDust Mini Black takes a Micro ATX or Mini-ITX motherboard and offers four expansion slots. The power supply is ATX format, up to 194 mm long.
For storage, five 2.5-inch bays for SSDs and one 3.5-inch bay for a hard drive, on a removable cage.
The chassis is steel, the side door tempered glass. Commercial warranty: two years.

RGB front panel, interior and PCI slots in close-up
At the front, three 120 mm RGB fans behind a faceted perforated grille. From the inside, the same glow runs through the whole compartment. At the rear, four expansion slots await the graphics card.
Cooling: a 280 mm AIO at the front or on the top
Four 120 mm RGB fans are pre-installed: three at the front, one at the rear.
Thinking of going liquid? The front and the top each take a 240 or 280 mm AIO liquid cooling radiator, with 60 mm of clearance for the radiator and its fans. The top also takes two 120 or 140 mm fans.
Two dust filters protect the top and the bottom. The CPU cooler can be up to 165 mm tall.

Mini-tower format: 37 litres on the desk
410 mm high, 220 mm wide, 410 mm deep and 5.8 kg: the StarDust Mini Black sits next to the screen, its ports on top, always within reach.
A graphics card up to 350 mm in a mini tower
Small case, big card: up to 350 mm of graphics card, mounted horizontally.
The graphics card has 350 mm of length, the CPU cooler 165 mm of height, the ATX power supply 194 mm. Enough to aim for a real gaming build from the first assembly.
On the top: two USB 3.0 ports, a headphone jack and a microphone jack, next to the case buttons.

Gallery
Tech specs
Datasheet (PDF)References1
- Serie Model
- StarDust
Dimensions & Weight10
- Height
- 410 mm
- Width
- 220 mm
- Length
- 410 mm
- Net Weight
- 5.8 Kg
- Volume
- 36.98 L
- Box height
- 488.3 mm
- Box width
- 290.4 mm
- Box length
- 460 mm
- Gross weight
- 6.5 Kg
- Gross volume
- 65.23 L
Design16
- Usage
- Gaming
- Form Factor
- Mini Tower
- Color
- Black
- Raw Materials
- Steel, Tempered Glass
- Mred Cover
- No
- Window Right Side Panel
- No
- Window Left Side Panel
- Yes
- Window Raw Material
- Tempered Glass
- LED Lights
- Yes
- Motherboard LED Compatibility Brands
- No
- ARGB Compatibility
- No
- Side Bar LED Qty
- No
- LED Controler
- No
- LED Controler Operation Mode
- No
- Controler IRDA Remote Control
- No
- Front panel wireless connectors
- No
Conception7
- Dust Filters Qty
- 2
- Top Dust Filter
- Yes
- Front Dust Filter
- No
- Bottom Dust Filter
- Yes
- Removable Front Panel
- Yes
- Replaceable Front Panel
- No
- Removable Right Side Panel
- Yes
Compatibility & Clearance8
- Clearance Max. CPU Cooler
- 165 mm
- Motherboard Support
- Micro ATX, Mini-ITX
- Clearance Max. Horizontal Graphic Card
- 350 mm
- Vertical VGA Extension Slots
- No
- Front Fan and Radiator Clearance
- 60 mm
- Top Fan and Radiator Clearance
- 60 mm
- Supported PSU Type
- ATX
- PSU Max Length
- 194 mm
Cooling9
- Pre-Installed Fans - Front
- 3*120 RGB
- Pre-Installed Fans - Rear
- 1*120 RGB
- Fan Support - Front
- 3*120, 2*140
- Fan Support - Top
- 2*120, 2*140
- Fan Support - Rear
- 1*120
- Watercooling System Support
- Yes
- Radiator Support - Front
- 240, 280
- Radiator Support - Top
- 240, 280
- Radiator Support - Rear
- 120
Extension slots6
- Horizontal PCI Slot Qty
- 4
- Vertical PCI Slot Qty
- 0
- Horizontal VGA support
- Yes
- 2,5" Drive Bays Qty
- 5
- 3,5" Drive Bays Qty
- 1
- HDD removable rack
- 1
Connectivity7
- Connectors Location
- Top
- USB 2.0
- 0
- USB 3.0
- 2
- USB 3.2 Gen 2 Type-C
- 0
- 3.5mm Headset Jack (Audio+Mic)
- 0
- 3.5mm Headset Jack (Audio)
- 1
- 3.5mm Headset Jack (Mic)
- 1
Warranty & Docs1
- Commercial Warranty
- 2 années

















