Mini Crystal Sea White

Ref.: MR-037EAN: 3700755601107

This mid-tower case houses a build based on a Micro ATX or Mini-ITX motherboard. Airflow relies on three pre-installed 120 mm ARGB fans (1 at the rear and 2 on the side). It supports a graphics card up to 320 mm, a CPU air cooler up to 157 mm and an AIO radiator up to 280 mm.

Colours

Black
White

View specs

Where to buy?

The Mini Crystal Sea White lets the light in

Tempered glass at the front and on the side, a white steel chassis, three 120 mm ARGB fans. A 37-litre Micro ATX PC case where your build is the only decoration.

Mini Crystal Sea White PC case seen from three-quarters, glass panel, ARGB fans lit

A white gaming case with a glass panel, designed for Micro ATX

White outside, white inside: your eye goes straight through the front panel to the components.

A Micro ATX or Mini-ITXmotherboard, four expansion slots, an ATX power supply up to 165 mm: the essentials, nothing more.

Two 2.5-inch bays and one 3.5-inch bay take an SSD and a hard drive. The front panel and the right panel come off for the build.

Glass front panel of the Mini Crystal Sea White, white interior and ARGB LED strip

Connectors, ARGB fans and vented side panel

On top, three USB ports and a combined headset jack line up along the edge. Behind the glass, the 120 mm ARGB fans draw their rings. On the right side, long vents let air reach the two side fans.

240 or 280 mm AIO liquid cooling on the top

The top takes a 240 or 280 mm AIO liquid cooling radiator, or two 120 or 140 mm fans. The bottom takes two more, the rear a 120 mm fan or radiator.

Three 120 mm ARGB fans are pre-installed: one at the rear, two reversed on the right-hand side. A CPU cooler up to 157 mm tall also fits.

Two dust filters, top and bottom, protect the air intakes.

Right three-quarter view of the Mini Crystal Sea White, vented side panel and LED bar

A small white PC case: 37 litres, 6.07 kg

377 mm high, 280 mm wide, 348 mm deep. Straight lines, even vents, and white throughout.

ARGB lighting: controller, remote and synchronisation

An ARGB LED bar runs along the front upright, and the lighting is adjusted with a single press.

The built-in controller works on its own: the included remote adjusts the lighting of the fans and the LED bar.

It also syncs with Asus, MSI and Gigabytemotherboards. And for a graphics card, 320 mm of available length. Two-year commercial warranty; the M.RED cover is included.