Serenity 360

Ref.: AIRW-36EAN: 3700755648089

This AIO liquid cooler is built around a 360 mm aluminium radiator fitted with three 120 mm ARGB fans. Mounts on Intel LGA1700 / 1200 / 115x / 20xx and AMD AM5 / AM4 sockets. Spinning from 800 to 1800 RPM, its hydraulic bearing fans stay below 30.5 dB(A) and deliver an airflow of 45.6 m³/h and a pressure of 1.3 mmH2O. Pump: 23 dB(A) maximum. 2-year warranty.

View specs

Where to buy?

The Serenity 360 deploys three ARGB fans in 360 mm

A large-format AIO liquid cooler, for builds with the room to take it: three 120 mm fans, an aluminium radiator and an illuminated pump block.

Serenity 360 AIO liquid cooler at three-quarters, three ARGB fans and illuminated pump block

360 mm AIO watercooling: three mounts, three fans supplied

The radiator lines up three 120 mm mounts, and each one comes with its ARGB fan straight out of the box.

The Serenity 360 is built around a 360 mm aluminium AIO watercooling radiator. The three 120 mm fans are supplied with it: nothing to add to fill its full length.

Each fan carries a double ARGB light ring around its hub, and the pump block cover lights up in turn, M.RED logo at the centre.

Serenity 360 seen from the front: 360 mm radiator, three ARGB fans and pump block

Pump block, fins and braided sleeving, up close

First the pump block, its ARGB cover and its two tubes. Then the radiator from above, with its tightly packed rows of fins. Finally the block's contact plate, beneath braided-sleeved tubes.

ARGB fans with hydraulic bearings: the figures, one by one

Each fan spins from 800 to 1800 rpm on a hydraulic bearing, for an airflow of 45.56 m³/h and a static pressure of 1.28 mmH2O. They connect via 4 pins.

On noise, two separate figures: 30.5 dB(A) maximum for the fans, 23 dB(A) maximum for the pump. Fans and pump each state an MTBF of 30,000 hours.

Back of the Serenity 360 radiator, fins and ARGB rings of the three fans

A 394 mm AIO radiator, front, side and back

Three fans in a single run, the pump block linked by its two tubes: the Serenity 360 weighs 2.5 kg and reads at a glance, from the lit side as from the fin side.

Installation: a large case and an Intel or AMD socket

A 360 mm radiator calls for a case designed for it: that's the first measurement to check.

The radiator is 394 mm long ; the pump block, 72 × 83 × 68 mm. It mounts on Intel LGA1700, 1200, 115x and 20xx and AMD AM5 and AM4sockets, as well as on older AMD platforms, from AM3+ to FM1.

The pump draws 5 W at 12 V and connects via 3 pins. The Serenity 360 is covered by a two-year commercial warranty.