Skip to content

MRR-1050AG (VP2) Black

Ref.: MRR-1050AG-VP2EAN: 3700755692099

With 1050 W continuous, this power supply is 80 PLUS Gold certified. Its connectors are fully modular, with flat cables. ATX 3.1 compatible, it has a 12V-2x6 connector (PCIe 5.1) and four 6+2-pin PCIe connectors. Cooling relies on a 140 mm hydraulic bearing fan, measured at 24.1 dB(A) at 20% load. It comes with a 10-year warranty.

The MRR-1050AG keeps headroom for the graphics card

1050 W continuous, 80 PLUS Gold certified, ATX 3.1 compatible and fully modular: a PC power supply that leaves room for a more power-hungry graphics card.

MRR-1050AG (VP2) Black PC power supply seen at three-quarter angle, modular panel side

PCIe 5.1 graphics card: one 12V-2x6 and four PCIe 6+2

ATX 3.1 compatible, it connects a recent graphics card via its 12V-2x6 connector.

The 12V-2x6 connector (PCIe 5.1, 12VHPWR compatible) powers the graphics cards that require it; four 6+2-pin PCIe connectors remain available for the others.

Everything runs through a single +12 V rail of 82 A, delivering up to 984 W combined: graphics card and processor draw on the same reserve.

Two 4+4-pin processor connectors complete the set, for motherboards that require two.

Modular panel of the MRR-1050AG: graphics card, SATA, processor and motherboard connectors

PCIe connectors, label and mains inlet, up close

On the modular panel, the outputs reserved for the graphics card. On the label, the 82 A and 984 W of the +12 V rail. At the rear, the 100-240 V mains inlet and its switch.

  • Close-up of the PCIe and CPU connectors on the MRR-1050AG modular panel
  • Close-up of the MRR-1050AG label: 82 A +12 V rail, 984 W, 80 PLUS Gold logo
  • Close-up of the 100-240 V power inlet and switch on the MRR-1050AG

Modular power supply: eleven flat cables, plugged in as needed

Fully modular, the MRR-1050AG keeps only the cables your build needs plugged in: eleven flat cables, which lie flat behind the motherboard tray.

In total: one 20+4-pin motherboard connector, two 4+4-pin processor connectors, four PCIe 6+2, one 12V-2x6 and ten SATA connectors for storage.

Two cable ties and four mounting screws are supplied with the power supply, in its storage bag.

Three-quarter view of the MRR-1050AG (VP2) Black, mains input side, side panel with gold stripes

ATX format: 1050 W over 168 mm of depth

Fan side, modular panel, side face: 150 mm wide, 86 mm high, 168 mm deep, for 1.55 kg. It mounts like any ATX power supply, with four screws.

Fan side, modular panel and side of the MRR-1050AG at the same height

Cooling: a 140 mm fan tuned to temperature

Brushless and with a hydraulic bearing, the 140 mm fan speeds up with the temperature, up to 2000 rpm.

Stated measurements: 24.1 dB(A) at 20% load, 29.9 dB(A) at 50% and 40.1 dB(A) at full load. Noise follows what the configuration demands.

Seven protections are declared: OCP, OVP, UVP, SCP, OPP, OTP and SIP. The active PFC accepts voltages from 100 to 240 V.

The power supply is covered by a 10-year commercial warranty.

Fan side of the MRR-1050AG: hexagonal grille of the 140 mm fan

Gallery

  • MRR-1050AG (VP2) Black seen from three-quarters, connector side
  • MRR-1050AG (VP2) Black seen at a three-quarter angle, mains input side
  • Modular panel of the MRR-1050AG (VP2) Black
  • Fan side of the MRR-1050AG (VP2) Black
  • Side of the MRR-1050AG (VP2) Black, 1050 W marking
  • Specifications label of the MRR-1050AG (VP2) Black

References1

Serie Model
MRR

Dimensions & Weight10

Height
86 mm
Width
150 mm
Length
168 mm
Net Weight
1.55 Kg
Volume
2.167 L
Box height
130 mm
Box width
234 mm
Box length
363 mm
Gross weight
3.1 Kg
Gross volume
11.042 L

Design3

Usage
Gaming/Work Station
Color
Black
ARGB
No

General Data12

Continuous power
1050W
Peak Power
1050W
Form Factor
ATX 3.1
Modularity
100% modular
Wire-free design
Yes
Input Voltage (Vac)
100-240
Input Frequency
47-63
Input current
15-5A
PFC
APFC
Sand-by Power
<0.5
Average life time (h / 25°C)
>50000
Operating temperature up to (°C)
0-40℃

Output15

12V rails (multi-rail operation)
1
12V single rail operation
Yes
Overclocking key
No
+3.3V
25, 0,5
+12V1
82 A
+12V2
/
+12V3
/
+12V4
/
+12V5
/
+12V6
/
+5Vsb
2.5 A
Max. combined power 12V
984 W
Max. combined power 3.3V + 5V
125 W
Hold-up time at 100% load
16>
Power good signal
100-500

Cooling technology10

Fan type
Silent Fan
+SilentWings
Yes
Motor technology
Brushless DC fan
Bearing technology
hydraulic Bearing
Fan size
140*25
Max. fan speed (rpm), temperature-dependent
2000 rpm
Temperature control for case fans
Yes
dB(A) at 20% load
24.11
dB(A) at 50% load
29.89
dB(A) at 100% load
40.12

Protection7

OCP (over current protection)
Yes
OVP (over Voltage protection)
Yes
UVP (under Voltage protection)
Yes
SCP (short circuit protection)
Yes
OTP (over temperature protection)
Yes
OPP (over power protection)
Yes
SIP (Surge & Inrush Protection)
Yes

Safety certification10

CE
Yes
CB
Yes
TÜV
Yes
FCC
Yes
cRUus
No
cTUVus
Yes
RCM (Australia)
No
BSMI
No
CU (Russia)
Yes
CCC
No

Eco Efficiency1

80 PLUS certification
80+GOLD

Environmental directives4

Energy Star
No
ErP
No
WEEE
Yes
RoHs
Yes

Connectors16

Cable management
100% modular
Cables type
Flat cables
Flat cables
Yes
All-in-one cable (SATA/PATA/FDD)
No
No. of cables
Modular 11pcs
ATX-Motherboard (20+4-pin)
1
P8 (CPU)
/
P4+4 (CPU)
2
P4 (CPU)
/
PCI-e 6-pin (GPU)
/
PCI-e 6+2-pin (GPU)
4
PATA
3
SATA
10
FDD (Floppy)
1
PCIe 5.1
1
External fan connectors
/

Accessories6

Thumb screws
/
Screws
4
Cable ties
2
Velcro cable ties
/
Box/Bag for PSU/Cables
Yes
SFX-to-ATX adapter bracket
No

Warranty & Docs1

Commercial Warranty
10 années
You may also like

In the same range

Need advice?

Our support team replies within 24 working hours.