Skip to content
The M.RED Stardust Mini Black case in three-quarter view, with glass side panel and mesh front panel with fans lit in blue, on a dark background
Reviews

FNK Hardware builds a gaming PC for under €600 in the Stardust Mini

Published on April 10, 2023 · 2 min read

A Ryzen 5 5500, a B550M motherboard, 16 GB of DDR4 and twenty games tested at 1080p: for its small-budget build, FNK Hardware chose our Stardust Mini case. Thirteen minutes of video, to watch here.

The video

Building a gaming PC for under €600 (tested on 20 games in 1080p)

Build, noise, in-game performance, temperatures and power draw: the full configuration, from the box to the first launch.

FNK Hardware · 9 April 2023 · 13 min

The challenge: gaming without breaking the bank

FNK Hardware is a French channel that has made a speciality of good deals and affordable gaming builds. The idea behind this video is in its title: put together a PC able to run twenty games at 1080p for under 600 €, then put it to the test.

On that budget, every euro counts, and the case is often the part that gets sacrificed. FNK did the opposite, building the setup in a Stardust Mini Black — and suggesting the white version as an alternative in the description.

The video, chapter by chapter

Three stages, from unboxing to measurements.

  1. The components — right from the start

    A Ryzen 5 5500, a Gigabyte B550M DS3H, 16 GB of Kingston Fury DDR4-3200, an SSD, a Sharkoon power supply and a graphics card chosen for 1080p.

  2. The overview and the noise — at 8:20

    The PC once built, and how much noise it makes.

  3. Performance, temperatures, power draw — at 10:32

    Twenty games at 1080p, then the machine's temperatures and power draw.

Why a Stardust Mini

A micro-ATX mini tower that arrives already fitted with fans: the argument that counts when the budget is tight.

The Stardust Mini ships with four 120 mm RGB fans — three at the front, behind a wide mesh, one at the rear. No need to buy more for a mid-range build.

It takes a 350 mm graphics card, a 165 mm CPU cooler and a 280 mm radiator at the front, with two dust filters, five 2.5-inch bays and one 3.5-inch. Tempered glass left side panel, two USB 3.0 ports on top.

The case in the video

Stardust Mini, in black or white

FNK's is the black one; the video description also features the white one.

Watch on FNK

Build your own

The Stardust Mini is available from our resellers.

Read next

  • The M.RED stand at Computex 2023: black "M.RED" arch, "Up Your Game" banners, some twenty cases lined up on white podiums
    Events

    Computex 2023: M.RED sets up its booth in Taipei

    Four days at Asia's biggest computing show, one booth — M1403 —, a prototype with twenty-two fans and two cameras. A look back at M.RED's first time at Computex.

    Read more
  • The M.RED Crystal Sea case at three-quarter view, glass front and side, fans lit in blue, on a midnight blue background
    Reviews

    Hardwarecooking: the Crystal Sea, a fish-tank case shipped with seven fans

    Glass at the front and on the side, glass-to-glass corner, seven pre-installed ARGB fans for around €140: Hardwarecooking built an i9-13900K and an RTX 4070 into our Crystal Sea. Silver medal.

    Read more
  • The black Stardust Mini case set at an angle on a dark marble floor, fans lit in blue behind the glass
    Launches

    Stardust Mini: the M.RED micro-ATX arrives in black and white

    A micro-ATX mini tower that comes out of the box with four fans, takes a 350 mm graphics card and a 280 mm radiator: this is the Stardust Mini, in black and in white.

    Read more